Checklist SLM Setup

This guide shows the recommend method to configure Shift Light Module (SLM). Clicking each item (M1 Tune v1.5 only) will select the item and allow you to enter the required information. Once an item has been selected the help, for that item, can be displayed by hitting the F1 key.

Information and settings related to a MoTeC Shift Light Module (SLM) device connected via CAN.

Data is transmitted to the SLM on SLM CAN Bus at the default IDs. When SLM CAN Bus is Not in Use no data is transmitted.

The SLM is configured in five engine speed dependant stages. For each stage an engine speed can be defined for each gear. Within each stage the colour and intensity of each of the eight LEDs can be configured.

An additional SLM Warning group overrides the stage settings with configurable colour and intensity of each of the eight LEDs.

SLM Priority defines the precedence of the two indications:

• If SLM Priority is set to Shift Lights, SLM Stage 1 to SLM Stage 5 lights will override any warning lights.
• If SLM Priority is set to Warning, SLM Stage 1 to SLM Stage 5 lights will be overridden by any warning lights.