This guide shows the recommended method to configure the Throttle Lever system. Clicking each item (M1 Tune v1.5 only) will select the item and allow you to enter the required information. Once an item has been selected the help, for that item, can be display by hitting the F1 key.
Calibration
Follow the following procedure to calibrate the Throttle Lever Sensor
- Move Throttle Lever to zero position then select Throttle Lever Sensor Main Offset and then Press Q.
- Move Throttle Lever to 100% position then select Throttle Lever Sensor Main Scale and the Press Q.
Calibration is Complete.
If all is well the Time Graph should show a continuous progression of Throttle Lever Sensor from 0% to 100% as Throttle Lever is moved.
Comments
0 comments
Please sign in to leave a comment.